TN01 Probe requirements for FFSim 19mm probe holder AGM-GM00-640/AGM-GM00-896

Posted in: FFSim™, Technical Notes on July 14, 2026

Our FFSim™ feed frame simulator has multiple ports for PAT probes. These ports require probe holders to correctly connect PAT probes into the FFSim™, to maintain alignment and sealing. AGM-GM00-640/896 are suitable for many probes of outer diameter (OD) ¾”/19mm longer than 150mm. Here we specify exact probe requirements. Note we do not manufacture or supply probes.

Download Technical Note

Revised 11th August 2026 (version 02):

Title & date: Added “/AGM-GM00-896” to the title.
New section added: A whole new section, “1. AGM-GM00-640 vs AGM-GM00-896,” explaining that the two probe interfaces share the same ¾” bore but aren’t interchangeable — 640 pairs with Standard/Compact FFSim (AGM-GM00-507/654), 896 pairs with FlexCon5 (AGM-GM01-433, added today). The old sections 1 and 2 were renumbered to 2 and 3 to make room.
Certified probes table: Added a new row for the Sentronic “SentroPAT Compact” probe, noting the 200mm variant needs a slightly different install procedure and that 100mm/300mm variants aren’t compatible.
General requirements note: Extended the “valid for FFSim models” line to also cover AGM-GM00-654 and AGM-GM01-433, not just AGM-GM00-507.
Probe length spec: Split the single “400mm max” figure into per-model maximums — 400mm (Standard), 270mm (Compact), 310mm (FlexCon5).
Row deleted: The “Connections at back of probe” requirement (“must be potted or ATEX-rated”) was struck out entirely.

Request a Call Back

Collection & Use of Personal Information

By submitting your data, you are providing us with some level of personal information. This information is not stored on our website database. However, in order to respond to your enquiry, your data is emailed to our website’s email address where it is saved. Additionally, we may use your contact details to send you marketing material in the future. You may unsubscribe from any emails you receive following our first reply. We do not pass your data on to any third parties.